The rail track lifting and lining machine is suitable for lifting rails, bridges or other heavy objects when building railways; it is also suitable for industrial and mining enterprises, transportation, ports and other enterprises to transport, install, adjust equipment and hoist and transport various heavy objects as lifting tools . The following are the six safety precautions for the rail track lifting and lining machine, let us understand it together:
1. The rail track lifting and lining machine uses oil as the medium to transmit motion, so special attention should be paid to keeping the oil clean when using it, and dirty oil must not be added to the oil tank, otherwise it will affect the normal use of the machine. Rail track lifting and lining machine uses No. 15 (or No. 10) mechanical oil, and the oil level should be 30-35mm from the upper plane of the oil filling hole in the oil tank.
2. For the oil return valve in the form of the oil return valve stem of rail track lifting and lining machine, it should be tightened or loosened by hand; for the oil return valve in the form of the oil return handle, you can use the foot to step on the oil return handle to rotate the position. Do not use hard tools to forcibly strike.
3. The rotating parts of each hinge of the rail track lifting and lining machine should be lubricated frequently to keep the rotating parts flexible.
4.Pay attention to keep the rail track lifting and lining machine clean, do not throw it around, and press the piston rod to the bottom after use to protect the piston
5.If a locomotive is approaching during the start-up, the oil return valve should be released immediately, and the start-up device should be removed from the road.
6.When the rail track lifting and lining machine is displaced on the track, the running wheel of the machine can be used to push the machine to run, but when passing through the rail insulation joint, the rail track lifting and lining machine should be lifted to avoid damaging the communication signal
